At Corium we produce a wide range of quality chemical products formulated exclusively for the maintenance of machinery, vehicles and equipment. These include:
We understand that, in maintenance, the right employment of high-quality chemicals is the most important factor. Corium's research has developed and formulated a wide range of special products that provide you with:
The result of more than 40 years of intensive research and development, Corium products are made to keep you running longer and at optimum efficiency.
Safety and Chemicals
The engineering and research that goes into the development of each individual Corium product encompasses, as its first objective, ways to make the product easier and safer to use. Wherever possible, potentially dangerous or harmful elements are eliminated or rendered as safe as possible.
Where potentially damaging ingredients cannot be avoided in the chemical composition of a Corium product, extensive safety gudelines and warnings are prominently displayed. Corium are extremely proud of its enviable international safety record and its active support and participation in developing safer, yet equally effective replacements for dangerous compounds.
However, as in all trades and industrial activities, some commonsense safety precautions must always be observed. The Corium Chemical Division also firmly recommends that proper safety practices and approved safety equipment be used to ensure maximum worker well-being and safety.
Following are a few recommendations that the Corium Chemical Division suggests being included in your organisation’s safety program:
(a) Always wear proper eye protection when handling corrosive products, and avoid skin contact by wearing suitable aprons and gloves (which should be regularly dry- cleaned).
(b) When dealing with highly active or even buffered acid products, avoid prolonged contact with the skin. Hands should be washed after handling such products, and any spillage should be thoroughly rinsed with water. Where fumes are encountered, appropriate respiratory equipment should be used.
(c) Acid products should be handled, stored and applied following the manufacturers’ recommended practice. Avoid contact with skin, eyes or clothing at all time.
(d) Some products contain extremely alkaline material like lye or soda. Avoid prolonged exposure to vapors and always wear safe respiratory equipment and face masks. Keep away from face and eyes. These dangerous materials are deadly if swallowed and can cause eye and skin irritation. Avoid contact with skin, eyes, mucous membranes and clothing.
(e) Solvent based chemicals may cause skin irritation. Avoid contact with eyes, skin and clothing. Do not inhale vapour or spray mist. Do not store or apply near fire or flame. Do not apply to surfaces which may come into contact with food.
(f) Straight muriatic acids are often used in ordinary cleaning chemicals. Prolonged contact with skin is unadvisable, therefore protective gloves should be used to handle.
(g) Avoid smoking while handling any chemical to ensure enhanced safety. Inhaling some chemical fumes accidentally through cigarette smoke may produce a deadly gas mixture.
(h) Chlorinated solvents give off fumes that are dangerous under enclosed or nonventilated conditions.
(i) Cyanoacrylate esters display strong and instant skin tissue adhesion and all skin contact must be avoided. Accidentally bonded skin should be peeled apart and not pulled apart. Hot water also aids separation. Consult physician immediately in cases of internal contact or eye contact. Always use applicator nozzle to avoid skin contact and keep out of reach of children.
(j) Some chemicals or resins may cause rash in some highly allergenic persons. Use rubber gloves when in doubt.
(k) If chemical products are to be used in contact with food, wash the surface thoroughly before use.
(l) For products that are slippery by nature, spread paper on surrounding floor before applying.
(m) Avoid breathing aerosol’s gas vapour for prolonged periods in confined areas.
(n) For products that are toxic in nature, all reasonable precautions should be taken to avoid breathing of vapour and prolonged contact with the skin.
(o) Precautions should be taken when handling inflammable products.
(p) Keep containers tightly closed when not in use.
(q) If chemical products are inadvertently swallowed, consult physician immediately. Strictly observe all safety precautions relevant to the use of such products.
(r) Flammable products should be kept away from open flames. Avoid prolonged contact with the skin and avoid breathing vapor.
(s) Suitable fire-fighting devices must be readily accessible in working or storage places.
(t) Strictly observe all safety precautions relevant to the use of an aerosol product and or printed on the can’s label.
Industrial chemicals form the backbone of modern manufacturing and industrial processes. From industrial chemical distributor facilitating production to ensuring product quality, these chemicals play a crucial role in various industries. Understanding the diverse applications and properties of industrial chemicals is essential for businesses seeking optimal solutions for their unique requirements.
Magnagroup industrial chemical manufacturer stands as a prominent player in the realm of industrial chemicals, offering a wide range of high-quality products tailored to meet the specific needs of different sectors. As a manufacturer and industrial chemical distributor, Magnagroup plays a pivotal role in supplying critical chemicals that drive various industrial processes and beyond.
At Corium we produce a wide range of quality chemical products formulated exclusively for the maintenance of machinery, vehicles and equipment. These include:
• Special Cleaning Agents
• Adhesives
• Electronics Industry Maintenance and Repair Products
We understand that, in maintenance, the right employment of high-quality chemicals is the most important factor. Corium's research has developed and formulated a wide range of special products that provide you with:
Highest quality chemicals for maximum effectiveness and increased operating efficiency;
Formulae custom-tailored for specific applications for increased parts and equipment life;
Concentrated, high-strength chemicals that are safe and easy to use under Corium user safety guidelines; and
Chemical designed to eliminate downtime and cut maintenance costs.
The result of more than 40 years of intensive research and development, Corium products are made to keep you running longer and at optimum efficiency.
The engineering and research that goes into the development of each individual Corium product encompasses, as its first objective, ways to make the product easier and safer to use. Wherever possible, potentially dangerous or harmful elements are eliminated or rendered as safe as possible.
Where potentially damaging ingredients cannot be avoided in the chemical composition of a Corium product, extensive safety gudelines and warnings are prominently displayed. Corium are extremely proud of its enviable international safety record and its active support and participation in developing safer, yet equally effective replacements for dangerous compounds.
However, as in all trades and industrial activities, some commonsense safety precautions must always be observed. The Corium Chemical Division also firmly recommends that proper safety practices and approved safety equipment be used to ensure maximum worker well-being and safety.
Following are a few recommendations that the Corium Chemical Division suggests being included in your organisation’s safety program:
(a) Always wear proper eye protection when handling corrosive products, and avoid skin contact by wearing suitable aprons and gloves (which should be regularly dry- cleaned).
(b) When dealing with highly active or even buffered acid products, avoid prolonged contact with the skin. Hands should be washed after handling such products, and any spillage should be thoroughly rinsed with water. Where fumes are encountered, appropriate respiratory equipment should be used.
(c) Acid products should be handled, stored and applied following the manufacturers’ recommended practice. Avoid contact with skin, eyes or clothing at all time.
(d) Some products contain extremely alkaline material like lye or soda. Avoid prolonged exposure to vapors and always wear safe respiratory equipment and face masks. Keep away from face and eyes. These dangerous materials are deadly if swallowed and can cause eye and skin irritation. Avoid contact with skin, eyes, mucous membranes and clothing.
(e) Solvent based chemicals may cause skin irritation. Avoid contact with eyes, skin and clothing. Do not inhale vapour or spray mist. Do not store or apply near fire or flame. Do not apply to surfaces which may come into contact with food.
(f) Straight muriatic acids are often used in ordinary cleaning chemicals. Prolonged contact with skin is unadvisable, therefore protective gloves should be used to handle.
(g) Avoid smoking while handling any chemical to ensure enhanced safety. Inhaling some chemical fumes accidentally through cigarette smoke may produce a deadly gas mixture.
(h) Chlorinated solvents give off fumes that are dangerous under enclosed or nonventilated conditions.
(i) Cyanoacrylate esters display strong and instant skin tissue adhesion and all skin contact must be avoided. Accidentally bonded skin should be peeled apart and not pulled apart. Hot water also aids separation. Consult physician immediately in cases of internal contact or eye contact. Always use applicator nozzle to avoid skin contact and keep out of reach of children.
(j) Some chemicals or resins may cause rash in some highly allergenic persons. Use rubber gloves when in doubt.
(k) If chemical products are to be used in contact with food, wash the surface thoroughly before use.
(l) For products that are slippery by nature, spread paper on surrounding floor before applying.
(m) Avoid breathing aerosol’s gas vapour for prolonged periods in confined areas.
(n) For products that are toxic in nature, all reasonable precautions should be taken to avoid breathing of vapour and prolonged contact with the skin.
(o) Precautions should be taken when handling inflammable products.
(p) Keep containers tightly closed when not in use.
(q) If chemical products are inadvertently swallowed, consult physician immediately. Strictly observe all safety precautions relevant to the use of such products.
(r) Flammable products should be kept away from open flames. Avoid prolonged contact with the skin and avoid breathing vapor.
(s) Suitable fire-fighting devices must be readily accessible in working or storage places.
(t) Strictly observe all safety precautions relevant to the use of an aerosol product and or printed on the can’s label.
Selecting the right industrial chemical supplier is a critical decision for businesses aiming for operational efficiency, product quality, and compliance with regulatory standards. Magnagroup distinguishes itself as a trusted partner for companies seeking a reliable and customer-centric approach to their chemical supply needs.
Magnagroup as industrial chemical manufacturer boasts a rich legacy in chemical manufacturing, marked by a commitment to excellence and innovation. The industrial chemical distributor company's state-of-the-art facilities adhere to stringent quality control measures, ensuring that each chemical produced meets the highest industry standards. This dedication has positioned Magnagroup industrial chemical manufacturer as a reliable source for industrial chemicals.
Magnagroup industrial chemical manufacturer places a strong emphasis on quality control throughout the chemical manufacturing process. Rigorous testing procedures and adherence to international quality standards ensure that customers receive chemicals of the utmost purity and reliability. Additionally, Magnagroup industrial chemical distributor consistently invests in research and development to introduce innovative solutions that align with evolving industrial needs.
Magnagroup's industrial chemical manufacturer product portfolio spans a diverse array of industrial chemicals, catering to sectors such as manufacturing, construction, electronics, and more. From solvents and adhesives to specialty chemicals, Magnagroup industrial chemical distributor provides a comprehensive range that addresses the nuanced requirements of different industries.
As a stalwart in the realm of industrial chemical manufacturing, Magnagroup boasts an illustrious legacy marked by unwavering commitment and continuous innovation. Since its inception, Magnagroup has been a torchbearer of excellence, consistently producing chemicals that meet and exceed industry standards.
Magnagroup's industrial chemical manufacturer journey in chemical manufacturing has been characterized by a pioneering spirit. The company's early emphasis on research and development laid the foundation for a legacy that prioritizes cutting-edge solutions. Today, Magnagroup industrial chemical distributor stands as a symbol of quality and reliability in the competitive landscape of industrial chemical production.
Magnagroup’s industrial chemical manufacturer manufacturing facilities are equipped with state-of-the-art technology, ensuring precision and efficiency at every stage of production. The industrial chemical distributor company's commitment to staying abreast of technological advancements underscores its dedication to delivering chemicals of the highest caliber to industries across borders business.
Quality control is at the heart of Magnagroup's industrial chemical manufacturer operations. Rigorous testing procedures and adherence to global quality standards are the cornerstones of Magnagroup's commitment to excellence. The company's quality control measures are not merely compliance requirements; they are a testament to Magnagroup's unwavering dedication to delivering chemical solutions that surpass expectations.
Innovation is woven into the fabric of Magnagroup’s industrial chemical manufacturer approach to chemical production. The company invests significantly in research and development, exploring novel formulations and processes to meet the evolving needs of industries. Magnagroup's chemists and scientists work tirelessly to introduce innovative solutions that address contemporary challenges in the industrial sector.
Magnagroup's industrial chemical manufacturer are not only crafted with innovation but also adhere to stringent international standards. This commitment ensures that the chemicals manufactured by Magnagroup not only meet local regulatory requirements but also align with global benchmarks for quality and safety.
Magnagroup's prowess as an industrial chemical distributor is underlined by its extensive and strategically crafted distribution network. With a keen understanding of the local landscape, Magnagroup industrial chemical manufacturer has woven a web of distribution channels that ensures seamless access to its diverse range of industrial chemicals.
Magnagroup's industrial chemical distributor commitment to excellence extends to its supply chain management, a critical aspect that sets the company apart as an industrial chemical distributor of choice.
Efficiency is paramount in Magnagroup's industrial chemical distributor supply chain operations. The company employs cutting-edge inventory management systems that allow for real-time monitoring of stock levels. This proactive approach ensures that customers receive their required chemicals promptly, minimizing downtime and optimizing operational efficiency.
Timeliness is a hallmark of Magnagroup's industrial chemical manufacturer supply chain practices. The company understands that industries rely on a consistent and timely supply of chemicals to maintain seamless operations. Magnagroup's industrial chemical distributor commitment to reliable deliveries and consistent availability underscores its dedication to being a dependable partner for industries.
1. What sets Magnagroup apart as an industrial chemical manufacturer?
Magnagroup stands out as an industrial chemical manufacturer in worldwide due to its rich legacy and commitment to excellence. With a industrial chemical manufacturer manufacturing legacy that spans decades, Magnagroup industrial chemical manufacturer has consistently delivered high-quality industrial chemicals, earning the trust of various industries. The company's manufacturing processes are characterized by innovation, quality control, and a diverse product range.
• Legacy of Excellence
• Innovation in Chemical Production
• Diverse Product Range
2. How does Magnagroup contribute to the industrial landscape as a industrial chemical distributor?
Magnagroup's role as an industrial chemical distributor significantly impacts the local industrial landscape. The industrial chemical distributor company's distribution network, supply chain efficiency, and collaborative approach with local industries play pivotal roles in elevating the overall chemical procurement experience.
3. What is Magnagroup's industrial chemical manufacturer approach to quality control in chemical production?
Quality control is paramount in Magnagroup's industrial chemical manufacturer chemical production processes. The industrial chemical manufacturer company employs rigorous testing and inspection procedures, adheres to international standards, and incorporates innovative measures to ensure the highest quality across its product range.
Rigorous Testing Protocols
Magnagroup's commitment to delivering quality begins with its adherence to rigorous testing protocols. Each batch of industrial chemicals undergoes meticulous testing to verify purity, consistency, and adherence to specified standards.
Adherence to International Standards
Magnagroup's commitment to quality extends to compliance with international standards. By adhering to established benchmarks, the company ensures that its industrial chemicals not only meet but exceed industry expectations.
4. How does Magnagroup tailor gas welding for different metals and alloys?
Magnagroup's industrial chemical distributor expertise in gas welding extends to the tailored application of this technique for different metals and alloys. The company's approach involves a meticulous understanding of the unique properties of each material, allowing for precise customization of gas welding processes.
5. What are Magnagroup's safety commitments and quality control measures?
Magnagroup's industrial chemical distributor commitment to safety and quality control is unwavering, reflecting its dedication to delivering industrial chemicals that meet the highest standards. The company prioritizes safety in its operations, adheres to stringent quality control measures, and ensures that its products comply with international safety standards.
Adherence to Safety Standards
Safety is a paramount concern for Magnagroup industrial chemical distributor. The company strictly adheres to established safety standards in its manufacturing, distribution, and storage processes.
Occupational Health and Safety Practices
Magnagroup places a strong emphasis on occupational health and safety practices. Employees undergo regular training to adhere to safety protocols, minimizing the risk of accidents or mishandling during the manufacturing and distribution processes.
Rigorous Testing and Inspection Procedures
Quality control is embedded in Magnagroup's industrial chemical distributor DNA. Rigorous testing and inspection procedures are integral to the manufacturing process, ensuring that each batch of industrial chemicals meets the company's stringent quality standards.
International Standards Compliance
Magnagroup's commitment to quality extends to compliance with international standards. The company's industrial chemicals not only meet the regulatory requirements but also align with global benchmarks.
